Brand New OEM NAME PLATE KIT-3 SNAKE RED 7R3Z-6342528-AB |6342528| OG-EM-3-1

7R3Z-6342528-AB | Not replaced | | | MotorCraft Number: () ()

2007-2014|Ford|Mustang SHELBY GT-500 RED

450.00$

Out of stock
SKU OG-EM-3-1
1 × Brand New OEM NAME PLATE 7R3Z-6342528-AB |6342528|
Out of stock
1 × Brand New OEM FORD FRONT FENDER SNAKE COBRA RED Emblem RH PASSENGER SIDE MUSTANG SHELBY GT-500 2007-2014 7R3Z-16098-AA
In stock
1 × Brand New OEM FORD FRONT FENDER SNAKE COBRA RED Emblem LH DRIVER SIDE MUSTANG SHELBY GT-500 2007-2014 7R3Z-16228-AA

Description

BRAND NEW OEM EMBLEMS MUSTANG SHELBY GT500 FOR FENDERS AND TRUNK DECK | MUSTANG 2007-2009

 Please read: 

If you’re unsure if this part fits your vehicle, you can simply send us an e-mail with your VIN # and we can find out in no time if this is the right part for your vehicle. If not, we will help you find the correct part at the absolute lowest price on the web!!!   

Part Number:
7R3Z-16098-AA X 1 SNAKE RED RH Passenger Side
7R3Z-16228-AA X 1 SNAKE RED LH Driver Side
7R3Z-6342528-AB X 1 SHELBY RED

 Emblems Replacement:
How to Replace a Ford Car Emblem  Car emblems are used to identify a vehicle’s make and model, and any special features that it possesses.
Emblems may also identify the dealership where the vehicle was sold.
If the emblems on your car become old or damaged, you may want to replace them with new ones. You can replace your emblems by removing the old ones and putting new ones in the same location.       

 Instructions:
1 Remove the old emblems. Apply heat with a heat gun on its lowest setting, then pry them off with a putty knife.
2 Clean the area where you want to apply the emblem. If it is the previous emblem’s location, use a specially formulated adhesive cleaner to remove the adhesive. Use rubbing alcohol to remove any remaining grease or dirt and let the area dry completely.
3 Use the level and painter’s tape to create a straight line to mark the bottom or top of the emblem. You only get one chance to apply the emblem, so you want to ensure it goes on straight.
4  Prepare the emblem. Either remove the tape off its back to expose the adhesive or apply adhesive to the back. If you apply adhesive, clean the back of the emblem thoroughly so dirt does not become trapped between the emblem and your car.
5  Stick the emblem onto the car, using your painter’s tape mark as a guide. Hold the emblem in place for several minutes to ensure it thoroughly bonds with the vehicle.
Tips & Warnings  Use caution with heat guns, cleaners, and adhesives.
All of these items can be dangerous if used incorrectly.
 !For the Trucks Below, the Sticky Pad on the back will replace the obsolete/traditional Tabs of your existing EMBLEM!

 

Specification

Weight 0.8125 lbs
Dimensions 12.0 × 10.0 × 2 in
Web-SKU

(7R3Z6342528AB) (7R3Z-6342528-AB)

Color

Red

Emblem Kits

Emblem Placement

, ,

Emblem Trim

Emblem Year

, , , , , ,

Basic

6342528

Factory Status

Not replaced