Title: BRAND NEW OEM FORD OVAL 3D EMBLEM FITS REAR TAILGATE AND FRONT GRILLE COMBO 9′ X 3 1/2′ INCHES F-150 2004-2008 #CL3Z-8213-D
EXPEDITION 2007-2009 F-150 2005-2014 F-250-350-450-550 #CL3Z-8213-D
1- Do not buy it for appearance, all ovals may look alike but they are not all the same.
2- Checking the back of the old emblem would help a lot to choose the correct one.
3- Compare the engineering number of the old emblem of your car.
4- Take time and check the measurement, width, and Height of the emblem.
5- Review the description and applications of this Publication.
6- If you are not sure please send us a message with the vin number of your car and we can review the manual and tell you what the emblem of your car is.
Qty: Only 1 Set 2 pieces only! Includes TWO (2) Emblems for your Grille & Tailgate
Note: the manufacturer ford does not make this type of emblem in a color other than the original dark blue color, any other emblem of a different color is an imitation.
BRAND NEW OEM FORD OVAL REAR EMBLEM FORD F150 FLEX F250 F350 F450 F550
Front Grille Blue “Ford” Oval 9′ Inch Emblem is a direct fit for the following:
2005-2014 Ford F-150
ORIGINAL PART – GENUINE OEM FACTORY BRAND NEW SEALED-IN PACKAGE
If you’re unsure if this part fits your vehicle, you can simply send us an e-mail with your VIN # and we can find out in no time if this is the right part for your car. If not, we will help you find the correct part at the absolute lowest price on the web!!!
Applications are provided through literature and research and are correct to the best of our knowledge. Listed applications should be used as a guide and may fit additional vehicles. Please note the part number and verify it in your application before purchasing. Please contact us if you have any questions before purchasing.
2005-2014 Ford F-150
2008-2012|Ford|F-150-250-350-450-550 Super Duty
2008-2011|Ford|F-250 Super Duty
2008-2011|Ford|F-350 Super Duty
2008-2011|Ford|F-450 Super Duty
2008-2011|Ford|F-550 Super Duty
Size: 9′ X 3 1/2′ INCHES
Color: DARK BLUE | CHROME
Engineering Part Number:
Part Number: CL3Z-8213-D
Other Part Number OSI: 4L3Z-1542528-AB
How to Replace a Ford Car Emblem Car emblems are used to identify a vehicle’s make and model, and any special features that it possesses.
Emblems may also identify the dealership where the vehicle was sold.
If the emblems on your car become old or damaged, you may want to replace them with new ones. You can replace your emblems by removing the old ones and putting new ones in the same location.
1 Remove the old emblems. Apply heat with a heat gun on its lowest setting, then pry them off with a putty knife.
2 Clean the area where you want to apply the emblem. If it is the previous emblem’s location, use specially formulated adhesive cleaner to remove the adhesive. Use rubbing alcohol to remove any remaining grease or dirt and let the area dry completely.
3 Use the level and painter’s tape to create a straight line to mark the bottom or top of the emblem. You only get one chance to apply the emblem, so you want to ensure it goes on straight.
4 Prepare the emblem. Either remove the tape off its back to expose the adhesive or apply adhesive to the back. If you apply adhesive, clean the back of the emblem thoroughly so dirt does not become trapped between the emblem and your car.
5 Stick the emblem onto the car, using your painter’s tape mark as a guide. Hold the emblem in place for several minutes to ensure it thoroughly bonds with the vehicle.
Tips & Warnings Use caution with heat guns, cleaners, and adhesives.
All of these items can be dangerous if used incorrectly.
!For the Trucks Below, the Sticky Pad on the back will replace the obsolete/traditional Tabs of your existing EMBLEM!